News

27.09.2007
“ROEL” Group of Companies has created a brand new “National Geological Survey Company ” (NGSC). 

“ROEL” Group of Companies has created a brand new “National Geological Survey Company ” (NGSC). In September 2007, to provide for the development of Russian geological survey industry by means of venture capital, “ROEL” group of companies created one of the first brand new companies in Russia – the “National Geological Survey Company” (NGSC). The key tasks of NGSC are geological surveys, search, prospecting and field exploitation of mineral deposits (precious, nonferrous and rare metals).

“National Geological Survey Company” has been designated to be the general contractor for performing a series of forecasting-exploration and prospecting evaluation surveys on the Kadara mining fields, the largest mining fields in the Chita Region. The forecasted deposits of hardrock gold in these mining fields are over 100 tons. The rights for research, exploration and exploitation of Kadara belongs to “FavoritCenter” LLC. The plans are to attract investments for the research and exploration of these mining fields - more than 100 million USD.
 

05.07.2007
“Agrika Produkty Pitaniya” OJSC will increase their registered capital 1.6 times - up to 3.3 billion rubles, according to the decision made by the company’s management, from July 2, 2007 and from May 22, 2007 

“Agrika Produkty Pitaniya” OJSC will increase their registered capital 1.6 times - up to 3.3 billion rubles, according to the decision made by the company’s management, from July 2, 2007 and from May 22, 2007, there will be 1 billion 198 million 461 thousand rubles of structural issue placed by private offering; provisions have been made for the issue and distribution of 373 thousand 461 common uncertified shares with nominal value of 1 thousand rubles for a total amount of 373 million 461 thousand rubles and 412 thousand 500 preferred cumulative uncertified shares with nominal value of 2 thousand rubles for the total amount of 825 million rubles. At the moment registered capital of “Agrika” OJSC is 2 billion 101 million 539 thousand rubles, and it is divided into 2 million 101 thousand 539 shares with nominal value of 1 thousand rubles per share. Shares have been registered on July 6, 2006 under state number 1-01-55205-Е.
Therefore, as a result of placing the additional issue, the registered capital of the company will grow to 3 billion 300 million rubles. Sole owner of “Agrika” OJSC is “ROEL Capital” Management Company CJSC.
 

14.05.2007
The “FavoritCenter” Geological Survey Company, managed by the ROEL Group of Companies, discovered a large hardrock gold deposit in the Trans-Baikal Region 

The “FavoritCenter” Geological Survey Company, managed by the ROEL Group of Companies, discovered a large hardrock gold deposit in the Trans-Baikal Region.
A large hardrock gold deposit has been discovered by specialists of “FavoritCenter” company with the help of remote earth sensing (space monitoring) in Chita Region. The deposits are part of Kholodzhikan ore fields. Management of the geological survey company is being performed by the ROEL Group of Companies.
At present, the full set of forecasting-exploration surveys has been completed. The analysis of geological, geophysical and aerospace materials had been finished, and a geological model of the minefield and geological exploration project have been developed according to these results.
“The presumed resources of the licensed area, which the company owns, may surpass 100 tons, or 3.2 million ounces. Further mine evaluation work will require an investment of 150 million rubles, - according to Vladimir Burynda, the director general of “FavoritCenter”. – We are ready to consider cooperation proposals from major geological survey and mining companies, interested in expanding their mineral resources base”.
 

25.01.2007
National Technology Group (NTG) has begun a project for introducing autoresonance vibration technologies into the industrial sector 

National Technology Group (NTG) has begun a project for introducing autoresonance vibration technologies into the industrial sector
National Technology Group (NTG) has begun their project for introducing autoresonance vibration technologies into the industrial sector, specifically for the production of autoresonance process vibration ultrasonic machinery.
In comparison with the processing technologies currently being used, autoresonance increases the capacities of machines and devices by many times. The essential issue here is that energy consumption is significantly reduced down to the lowest level possible for this class of devices.
Calibration of a vibration machine, particularly an ultrasonic one, to autoresonance mode allows for maximum performance efficiency despite the reverse effect of the processed medium which the machine is exposed to.
Autoresonance technologies have a rather broad range of applications - from industrial uses to the production of high-efficiency home appliances and medical equipment.
Ultrasonic devices for turning (for the manufacture of tools made from hard-to-work materials)
Devices for hardfacing tools (improves surface cleanness and strengthens the exteriors of tools due to its resistance to deformation)
Devices for wiredrawing (manufacture of wire, for example, fine precious metal thread)
The project plans the construction of all autoresonance devices according to one main principle, possibly using the same basic units. As for the ultrasonic machines, these units are both ultrasonic autoresonance generators and operating oscillation systems.
Preliminary theoretical and experimental research, as well as data from the testing of a prototype model, confirmed the possibility of the machines having significantly lower energy and metal consumption while their production capacities, performance, and environmental safety characteristics are higher.
At present, NTG specialists are developing a new device for vibration cutting and the smoothing of hard-to-treat materials such as titanium, heat-resistant steel and ceramics, cast iron, diamonds, etc.
"Introduction of autoresonance machines would allow to significantly reduce the run time of process cycles for tool processing, thus reducing production costs due to a long chain of intermediate operations being excluded from the process, such as grinding, polishing, etc.," emphasized Vitaliy Krupenin, General Director of National Technology Group, CJSC.
 

24.01.2007
A renovated river embankment has been opened in Sochi within the framework of a development project of ROEL Projects and Finance 

A ceremony took place in Sochi dedicated to the city's opening of a completely renovated and reconstructed river embankment. The ROEL Projects and Finance company organized this work for the resort city following the plans of one of its development projects.
Many years ago the embankment was damaged by a flood, and now it once more has become a recreational area for both residents and visitors to Sochi. The parapet and the decorative architectural shapes have been completely rebuilt, and a surrounding area of around 3 hectares has been landscaped with new trees planted. The builders have put in place new public utility network systems, installed lights matching the dominant architectural style, and also covered the walkways with pavestone.
Representatives from both the regional administration and Sochi City Administration were present at the opening ceremony.